Address: 1534 Plaza Drive., Hamilton, OH 45013 Phone: 513-892-1456 Hours: Monday- Friday 10am - 7pm; Saturday 9am - 5pm; Sunday 11am - 4pm
Cart 0
Tamiya 1/10 Zakspeed Mercedes-Benz 190 E Evo.II 4WD Kit  (TAM58638)


Tamiya 1/10 Zakspeed Mercedes-Benz 190 E Evo.II 4WD Kit (TAM58638)

$ 148.80

This is the radio controlled, electric powered 1/10 scale,
Mercedes Benz 190E 2.5-16 Evo. II Zakspeed Car Kit.





Chassis: TT-01 type E composite chassis-compatible with a variety of
Tamiya Option Parts
Drive: Four wheel shaft drive
Electronic Speed Control: Tamiya TBLE-02S (brushless motor
Motor: 540 brush equipped motor with pre-attached leads
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction, plastic body
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed polycqarbonate, with window mask and body trim
decals, separately molded mirror, wing and grille parts
Tires: Slick 0.94" (24mm) wide, 2.5" (63.5mm) diameter
Wheels: Six spoke plastic with gold finish, 12mm hex, 1.9" (48mm)
diameter, 0.87" (22mm) wide
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Steering: Bell-crank type with servo saver




TT-01 Type E chassis, 540 motor, ESC, clear Mercedes 190 body, tires,
foam bumper, 19 tooth pinion gear, 61 tooth spur gear, window
mask decals




Radio: 2-channel with one standard servo
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment




Length: 17.5" (445mm)
Width: 7.2" (184mm)
Wheelbase: 10.1" (257mm)
Length: 17.3" (440mm)
Width: 7.5" (190mm) at widest point
Height: 4" (102mm)




For replacement, or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Front Hubs 1 DTXC1547
2 5x11mm Rear Hubs 1 DTXC1547
2 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Fr Driveshaft Joint 1 DTXC1547
2 5x11mm Rear Driveshaft Joint 1 DTXC1547

Share this Product