Address: 1534 Plaza Drive., Hamilton, OH 45013 Phone: 513-892-1456 Hours: Monday- Friday 10am - 7pm; Saturday 9am - 5pm; Sunday 11am - 4pm
Cart 0
DLE Engines DLE-60cc Twin Gasoline (DLE60)

DLE

DLE Engines DLE-60cc Twin Gasoline (DLE60)

$ 549.99

This is the DLE 60cc Twin Cylinder Gasoline Engine.

FEATURES:

  • Horizontally opposed twin cylinders for low vibration operation
  • Aluminum alloy crankcase
  • Electronic ignition for simpler starts, higher performance and minimal RF noise
  • Two year limited warranty through Hobby Services beginning at date of purchase

 

INCLUDES
  • DLE 60cc Engine
  • Electronic ignition
  • NGK CM6 Spark plug
  • Two Pitts style mufflers
  • Engine stand-offs

 

REQUIREMENTS
  • Gasoline with at least 87 octane rating
  • 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance 4.8 - 12V battery for ignition (separate receiver style pack can be used) (LiPo & LiFe requires voltage regulator)
  • Propeller: 22x10, 23x8, 23x10, 24x8
  • Field equipment

 

SPECIFICATIONS
  • Displacement*: 61 cc (3.7 cu in)
  • Bore*: 1.42 in (36 mm)
  • Stroke: 1.18 in (30 mm)
  • Weight, engine: 4.37 lb (1.56 kg)
  • Weight, muffler: 2.82 oz./ 3.00 oz./(80 g/85 g)
  • Weight, ignition module: 7.44 oz. (211 g)
  • Output: 5.5 hp @ 8,500 RPM
  • Static Thrust: 15.2kg Pulling Force/100 meters altitude 13.5kg Pulling Force/1,800 meters altitude
  • Gasoline/Oil Mixture: 30:1
  • Gasoline Octane Rating: 87
  • Recommended Propellers: 22x10, 23x8, 23x10, 24x8
  • Carburetor Adjustments;
  • Low Speed Needle: 1.5 turns out as a starting point, adjust for a smooth idle and a reliable transition to high throttle
  • High Speed Needle: 1.5 turns out from closed, adjust needle to peak RPM, if engine slows or dies at full throttle, the high-speed mixture is likely too lean
  • Muffler Length: 5" (128mm)
  • Muffler Diameter: 2" (50mm)
  • Exhaust Outlet Length: 3.4" (85.5mm)
  • Exhaust Outlet Diameter: 0.79" (20mm)
  • Distance Between Mounting Hole Centers Same Side: 2.7" (69mm)
  • Distance Between Mounting Hole Centers Opposite Side: 2.7" (69mm)
  • Width from Cylinder Head to Cylinder Head: 8.5" (215mm)

 

COMMENTS
  • *Note: The displacement and bore values have not yet been confirmed.

Order DLEQ0551 if a Propeller Drill Guide is needed


Share this Product