Address: 1534 Plaza Drive., Hamilton, OH 45013 Phone: 513-892-1456 Hours: Monday- Friday 10am - 7pm; Saturday 9am - 5pm; Sunday 11am - 4pm
Cart 0
HiMax Brushless Motor (HC2816-0890)

Maxx Products

HiMax Brushless Motor (HC2816-0890)

$ 59.99

Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for lightweight, high efficiency, high torque, and durability Himax Outrunner motors are sure to make today’s radio controlled models perform. Please read the entire operating manual to ensure correct functionality and best performance. The HC2816 series motor is made for small to medium size models weighing 16 to 40 ounces.

Features: High Efficiency - High Power - High Torque - Lightweight - Replacement for 370-400 Motors

Specifications:

  • Weight: 77g, (2.7oz), Motor with stick mount
  • Max Power: 200W, (This is dependent on several factors)
  • Max RPM: 20,000 RPM
  • Diameter: 27.8mm, (1.09”)
  • Length: 32.5mm(1.28”)
  • Shaft Diameter: 4.0mm (.1575”)
  • Mounting Screw Thread: 2.5mm, max depth 4.5mm, on 16mm, (.625”) bolt circle
  • Maximum Case Temperature: 65o C, (149oF)
  • Electrical Specifications: HC2816-0890 Kv = 890, Rm = .119, Io = 0.8,

Efficient Operating

Current =4-13 A, 18A Max 15 seconds HC2816-1220 Kv = 1220, Rm = .058, Io = 1.4, Efficient Operating Current = 7-20A, 25A Max 15 seconds

Operation:

1. Himax Brushless motors require brushless sensorless speed controls. Failure to use a brushless sensorless electronic speed control (ESC) can result in damage to the motor and/or ESC. A Castle Creations Phoenix series ESC is recommended for best performance. The standard setting for timing advance is recommended for best operation.

2. The three wires of the motor can be connected to the three output leads of the ESC in any order. Check the direction of rotation of the motor. If the motor spins in the wrong direction switching any two of the motor wires will reverse rotation. Be sure to insulate the wires to prevent shorting which may damage the ESC.

3. Do not shorten the motor wires. Shortening or cutting the motor wires voids the warranty and may cause motor failure. If the supplied connectors are not to be used, remove them by desoldering. DO NOT CUT THE CONNECTORS OFF!

4. Allow for proper cooling of the motor during operation. With extremely high capacity batteries, care must be taken to prevent excessive motor temperature. Overheating of the motor is not covered under warranty. Insufficient cooling can result in overheated motors, even when operated at moderate power levels.

5. Do not disassemble the motor. Disassembling the motor voids the warranty. If service is required please return the unit to Maxx Products for service.

6. Install the propeller after proper rotation has been determined. Consult the ESC operation manual for proper arming and use procedures. Be sure the prop is clear before starting the motor. Once the battery is plugged in stay clear of the prop, electric motors are capable of extremely high torque and can be very dangerous.


Share this Product